Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Highland
Garage door repair in Highland typically runs $150 – $600, with spring replacement landing between $180 – $340 and cable work at $130 – $250. Most repairs on Highland’s aging mid-century homes are done same day because our trucks carry the parts for the eight brands we service. If your door won’t lift, grinds when it moves, or sits crooked in the opening, call (866) 798-2664 and we’ll get it running right.

Highland’s housing stock is mostly 1950s – 1970s single-story tract homes, and the garage doors on those houses are reaching the end of their natural life at the same time. Original wood tilt-up doors warp. Torsion springs fatigue in the heat. Openers that were installed during the Carter administration finally give out. We know these houses because we’ve repaired hundreds of them. When you call, we already know what your door likely is before we pull up.
Why Murrieta Garage Door Service Is Highland’s Preferred Garage Door Repair Company
Garage doors are all we do. No plumbing calls, no HVAC diagnostics, no general carpentry side work. Every tool in the truck, every part on the shelf, and every hour of training behind our techs is dedicated to one trade. That single-trade focus means when a Highland homeowner describes a symptom over the phone, we can often narrow the cause before we arrive. And on the older tilt-up doors common in Highland’s original tracts, that diagnostic head start saves real time.
Highland’s older homes throw problems at you that newer subdivisions don’t. Setback constraints off Highland Avenue force compact work in narrow side yards. Original single-piece doors use hardware that big-box installers have never touched. Our team has the custom brackets, retrofit rails, and specialized replacement parts needed to keep those doors in service instead of pushing a full replacement that may not fit the opening without reframing. We work on the brand you already have, and we work on the door style your house was built with.
Noel Carrington has built this operation around one principle: know the trade completely or don’t offer it. Highland homeowners call us because the person who shows up understands a 1960s Wayne Dalton tilt-up as well as a current LiftMaster MyQ smart opener. That depth is why we keep getting referred from neighbor to neighbor in every tract we work.
Styles & brands we work with






Garage Door Cable Repair in Highland
Garage door cable repair in Highland runs $130 – $250, and it’s one of the most common calls we take in this city. Highland’s hot inland summers and dry Santa Ana winds accelerate cable wear, and when a cable frays or snaps on an aging torsion system, the door becomes dangerous to operate. A snapped cable leaves the door off balance, which puts strain on the opener motor and can drop the door suddenly if the remaining cable lets go.
When Your Cable Has Had Enough
You’ll notice frayed strands near the bottom bracket, a door that lifts unevenly, or a grinding sound when the door moves. On Highland’s original wood tilt-up doors, the cables run through drums that often have decades of wear, so a cable job frequently involves replacing the drum, not just the cable itself. Our techs carry the full assembly so the repair gets done in one trip.
Why Cables Fail Faster Here
Highland’s dry heat breaks down the galvanized coating on steel cables, and the fine dust that blows through on Santa Ana wind days gets into the cable drum grooves and acts like sandpaper. We see doors in the older tracts off Highland Avenue where the cables are visibly corroded at the bottom bracket while the rest of the door looks fine. That corrosion point is where they snap.
We quote the exact cable repair before any work begins. No one starts a job without your sign-off on the number, and that number doesn’t move after we start. Call (866) 798-2664 for a free estimate on cable work in Highland.
Garage Door Spring Repair in Highland
Garage door spring repair in Highland costs $180 – $340, and on this city’s homes it’s usually a torsion spring that’s failed. Highland’s summer heat regularly pushes past 100°F, and that thermal stress cycles the metal faster than in coastal climates. A spring that might last ten years in San Diego will often give out in seven or eight in Highland’s 92346 zip code.
Signs Your Spring Is Dead
A loud bang in the garage like a gunshot, a door that won’t lift more than a few inches, or an opener motor that strains and clicks but can’t move the door. Those symptoms on a 1960s tilt-up off Highland Avenue usually mean the original or a past replacement spring has snapped. The door is dangerous to move manually at that point because the entire weight of the slab is uncontrolled.
What We Replace It With
We install high-cycle springs rated for 25,000 cycles where the original may have been a 10,000-cycle spring. That matters in Highland because the heat and wind fatigue springs at a faster rate than anywhere else in the region. Upgrading to a higher cycle rating buys real years in this climate. The replacement includes end bearing plates where needed and a balance test after installation so the door opens smoothly through its full travel.

Spring replacement carries serious injury risk if done wrong, so this is a job for a trained professional on a live torsion system. We quote the spring replacement before we start and that price is the price. Call (866) 798-2664 to get a Highland spring repair scheduled.
Trusted Brands We Service in Highland
We’re certified to service eight of the most widely installed residential garage door brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That breadth matters in Highland because the city’s housing stock spans six decades, and no two decades used the same brand consistently. We service what you already have rather than steering you toward a replacement just because our parts shelf is limited. Our trucks carry brand-specific brackets, drums, and opener components for the brands most common in Highland’s older tracts, so most repairs happen same day.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Highland Homes
- Warped and delaminating wood doors. Highland’s 100°F+ summers and occasional winter rains cause original single-piece wood doors to swell, crack, and pull away from their frame. A door that’s binding against its jamb is often a warped slab, not a spring problem.
- Out-of-production opener hardware. Many Highland homes still run openers and rails that were discontinued decades ago. When those fail, the fix requires custom bracket fabrication and retrofitted rails rather than a drop-in replacement. That’s work most neighboring-city installers won’t touch.
- Cable snap from fatigued springs. Heat fatigue weakens torsion springs, and a weak spring lets the cable slack and jump its drum. The result is a snapped cable and a door hanging off-kilter. Local temperatures make this failure cycle faster in Highland than in surrounding cities.
- Track misalignment from tight side yards. High setbacks off Highland Avenue mean garage doors sit close to the property line, and home repairs done in that narrow space often leave tracks re-aligned on an angle. That misalignment grinds rollers, strains the opener, and shortens the life of every moving part.
Pricing for Garage Door Repair in Highland, CA
We keep pricing flat and quoted. A typical broken spring replacement in Highland runs $180 – $340 depending on whether we’re swapping one or both springs and whether the door is a tilt-up or sectional. Cable repair sits at $130 – $250, track realignment $120 – $240, roller replacement $110 – $220, and opener repair $120 – $320. New opener installation runs $250 – $550, and a full replacement door ranges from $700 to $2200 depending on the material and whether we’re working with a custom-fit opening.
| Service | Typical Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| Opener Repair | $120 – $320 |
| Full Door Replacement | $700 – $2200 |
The quote you get over the phone or when we arrive is the quote on the invoice. We do not pad a job with surprise line items after the work is underway. Estimates are free, and every number is agreed before we turn a wrench.
Call (866) 798-2664 to get a written price for your specific door. We’ll tell you what’s wrong, what it costs, and what the fix looks like.
We Also Serve Cities Near Highland
Our Garage Door Repair team covers Highland and the surrounding communities of San Bernardino, Muscoy, Redlands, and Loma Linda. If your property sits on the edge of Highland’s 92346 boundary, we’ll still take the call. Learn more about our service area on the Garage Door Repair in Highland page.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Highland
They shorten the life of torsion springs by roughly 25 – 30% compared to coastal neighborhoods, because sustained 100°F temperatures accelerate metal fatigue and the dry winds introduce fine dust that clings to spring coils and cable grooves. That’s why we install high-cycle springs rated for 25,000 cycles when we replace them in Highland. If your door has been in service for more than seven years and it’s never had a spring replaced, it’s probably close. Call (866) 798-2664 and we’ll inspect it before it fails.
Many can be repaired with a combination of hinge and bracket realignment, track adjustment, and panel reinforcement, but if the wood itself has delaminated at the corners, we’ll be honest about the limits of a repair and give you a written replacement quote. We’ve saved dozens of original doors in Highland’s older tracts, and we’ve also told homeowners straight when a slab was too far gone. You’ll get the facts either way, and a replacement quote only if the repair won’t hold.
In the tract homes off Highland Avenue, garage doors sit just a few feet from the property line, so spring and cable repairs have to be done in a narrow side yard with limited swing room for tools. Combine that with original tilt-up doors that use out-of-production hardware, and you get a job that most generalist installers won’t take or can’t do cleanly. We’ve developed compact low-clearance techniques specifically for these Highland setbacks, and we carry the custom brackets and retrofit parts the work demands.
We service all the major residential brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, and we carry brand-specific parts for the models most common in Highland. From a legacy Craftsman opener on a 1970s tract house to a current MyQ-connected LiftMaster on a newer reno, we work on the system you own. Call (866) 798-2664 with your brand and model and we’ll tell you if the part is on the truck.
Spring repair in Highland runs $180 – $340, and cable repair runs $130 – $250. A spring and cable job done together usually lands at the lower end of the combined range because we’re already working in the same assembly. We quote the full price before any work starts, and that number is final. Call (866) 798-2664 for a free estimate on your exact door.
Written by Noel Carrington, Owner at Murrieta Garage Door Service, serving Highland since day one.