Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Burbank, CA
Burbank homes need a garage door company that understands what 70 years of sun, Santa Ana winds, and 1940s construction actually do to a door system. We install, repair, and replace garage doors across Burbank every week, and the jobs here are different from the rest of Los Angeles. Most of the homes we work on in 91505, 91506, and 91507 still have their original wood tilt-up doors or early sectional wood doors. When those doors fail, you need a specialist who knows how to reinforce, realign, and often replace them without tearing into the framing. Call us at (866) 798-2664 when you need a straight answer and a scheduled appointment.
Why Burbank Homes Are Different
Burbank was built fast during the post-WWII aerospace boom, and the houses reflect that. The dominant housing stock is 1940s through 1960s ranch-style and minimal traditional homes. Many of those still carry one-piece tilt-up wood garage doors. These doors are 60 or more years old now. The single horizontal hinge at the top takes the entire weight every time the door opens, and when that hinge or the side tracks wear out, the door binds or drops. Winter rains swell those old wood doors just enough to change the clearance in the tracks. Summer heat dries them back out and widens the cracks. That cycle, repeated for decades, is why so many Burbank doors are on their second or third set of hardware.
The other thing we see constantly is the Verdugo Mountain effect. Homes right against the foothills, including the streets running north of Glenoaks Boulevard, sit on sloped driveways. A garage door on a slope fights gravity harder than a flat-lot door. Springs rated for a flat install fail sooner when the door leans back against the opener. Burbank’s seismic retrofit guidelines also recommend bracing the garage door opening, and most homeowners never hear about that until they call us. A braced opening keeps the door and the header from shifting in an earthquake, and it’s a step we discuss on nearly every older Burbank install.
Styles & brands we work with
Our Main Burbank Services
Two service calls make up the bulk of what we do in Burbank: mechanical door repair and opener repair. Both have their own dedicated Burbank pages, but here’s the quick version of what each involves.
Garage Door Repair in Burbank
Mechanical door repair in Burbank usually means a snapped torsion spring, a broken cable, a bent track, or worn rollers on a door that’s still got good structure. The old wood doors here are heavy, and the springs that came with them were not sized for how the door behaves after 60 years of heat and moisture cycling. When we repair a Burbank door, we check the full system: springs, cables, hinges, tracks, rollers, and the opener’s relationship to the door. One bad spring can mask a second problem that shows up two weeks later. See the full breakdown on our Garage Door Repair in Burbank page.
Garage Door Opener Repair in Burbank
Opener repair in Burbank is often more about the door than the motor. When a wood door swells or a spring loses tension, the opener strains against it, the gears strip, and the motor burns out. We diagnose the opener and the door together, because fixing only the opener on a door that’s out of balance means you’ll be calling again in a few months. We work on LiftMaster, Chamberlain, Genie, Craftsman, and Raynor units, including the MyQ smart systems. Read the full scope on our Garage Door Opener Repair in Burbank page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Burbank
Installing a new garage door in Burbank usually means saying goodbye to a 60-year-old wood tilt-up that has cracked panels, worn hinge points, and gaps big enough to let dust from the Verdugo foothills into the garage. The problem this service solves in Burbank is specific: the city’s mid-century tract homes were built around door openings that don’t match modern sectional door specs, and the intense afternoon sun on the mountainside-facing exposures means the replacement door has to be chosen for UV resistance, not just appearance. We measure the actual opening, check the header and side jambs, and then recommend a door that fits the structure and the climate. Our Garage Door Installation process covers every step from removal to final trim sealing.
Garage Door Replacement
Signs you need it
The door panels are cracked or split from UV exposure, the tilt-up hinge has pulled loose from the frame more than once, or the door no longer closes flush against the jamb.
What it costs in Burbank
A full garage door replacement in Burbank typically runs $700 to $2,200 depending on door size, material, and whether the old opening needs structural refitting.
How we do it
We remove the old door and hardware, inspect the framing, install new tracks and a new door sized to the opening, then balance and test the full system.
Garage Door Installation Contractors
Signs you need it
You’re planning a full replacement or a new build, and you want a single company to handle the door, tracks, springs, and final opener integration instead of coordinating two or three different trades.
What it costs in Burbank
Contractor-level installation work in Burbank falls within the $700 to $2,200 range for the door, with opener installation quoted separately at $250 to $550.
How we do it
We handle the full install from tear-out through trim work, including seismic bracing when the existing opening calls for it, and we confirm the final quote before any work starts.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, or wind-blown dust and water are getting into the garage from the bottom edge or the side jambs.
What it costs in Burbank
Seal installation is part of the broader garage door repair range of $150 to $600 when done alongside other work, or quoted as a focused repair job during the estimate.
How we do it
We replace the bottom weatherstrip, adjust the side seals, and reset the door’s closed position so the seal makes full contact with the floor.
What Garage Door Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| New door installation | $700 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
Those numbers cover most residential Burbank jobs. Hillside streets and openings that need framing reinforcement push toward the upper end. Every quote is set before we begin, and the price you approve is the price you pay.
How long does garage door installation take in Burbank?
A standard installation takes most of a day, including removal of the old door and hardware. If the opening needs structural refitting or seismic bracing, we schedule a second visit and tell you that during the estimate.
Can you match my Burbank home’s mid-century look?
Yes. We install doors that fit the ranch and minimal traditional styles common in Burbank, and we can match the original look with modern materials that hold up better to UV and Santa Ana conditions.
Brands We Service in Burbank
We work on the brand you already have. That includes LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. We keep common replacement parts for all eight brands on the truck and at our local supply points, so most Burbank repairs don’t wait on shipping. See our brands for the full breakdown of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| Garage door repair | $150 – $600 |
Burbank prices run a little higher on older wood doors because the boards have shifted, the openings are rarely square anymore, and hillside installs add time. The estimate you approve is final. We quote the job before we start and we do not come back with a larger invoice.
Neighborhoods We Serve in Burbank
We cover all of Burbank, from the flat lots south of Magnolia Boulevard up to the hillside streets north of Glenoaks. Most jobs are scheduled same-week with repair calls prioritized by severity.
- Rancho Adjacent
- Magnolia Park
- The Verdugo foothills
- Burbank Hills above Glenoaks
- Equestrian District
Service Area – Cities Near Burbank
We also work in the cities directly around Burbank. Homeowners in Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA call us for the same garage door services, and we schedule across those areas weekly. If you’re in one of those cities and need a Burbank-level specialist, call the same number.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Burbank
Our estimates are free, and the quote you approve before work begins is the full price. We do not add hidden dispatch or fuel charges. If the job needs a part we don’t have on the truck, we tell you the part price before ordering anything.
Most standard door replacements on existing openings do not require a permit in Burbank. Structural changes, like widening an opening or significant header work, may trigger permit review. We tell you during the estimate if your job crosses that line.
Repair calls are prioritized by urgency. A snapped spring or a door that won’t close gets scheduled before a routine tune-up. Most Burbank repair visits happen within one to two business days, and we call when we’re on the way.
Call (866) 798-2664 for a free estimate or to schedule a repair in Burbank. We quote the price before we start, and we stand behind the work.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Norma Martinez"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
— Ernesto Rodriguez"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
— Nicole Bennett