Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Repair Across Van Nuys
When a torsion spring snaps on a 1962 tract home off Van Nuys Boulevard, you don’t want a handyman who “also does garage doors.” You want a specialist who knows exactly what’s on the other end of that rear alley. We’re Murrieta Garage Door Service, and garage doors are all we do. We work on the brand you already have, we carry the parts that Van Nuys houses actually need, and we get your door back in operation without selling you a replacement you don’t need. Call (866) 798-2664 for a free estimate.

Garage door repair in Van Nuys typically runs $150 – $600, and most spring or cable failures we see are fixed the same day. This page covers what actually goes wrong on Van Nuys’s postwar doors, what it costs, and why the older housing stock here creates repair patterns you won’t find in newer Valley subdivisions.
Why Murrieta Garage Door Service Is Van Nuys’s Preferred Garage Door Repair Company
Van Nuys homeowners call us because we understand what a 70-year-old garage door does in 105°F heat. Our Garage Door Repair team has worked on hundreds of original wood and early hollow-core steel doors across the 91401, 91405, 91406, 91411, and 91423 zip codes. We know which torsion springs fatigue first on sun-facing doors, which opener brands were installed in the 1950s through 1970s tract builds, and when an old single-piece tilt-up has reached the point where repair money is better spent on a retrofitted sectional.
We service eight major residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That brand-agnostic approach means we fix what’s on your house rather than steering you toward a replacement that fits our parts shelf. Led by Noel Carrington, our technicians are trained exclusively on garage door systems, not split across plumbing, HVAC, or general carpentry. Every tool in the truck and every part on the shelf is there for one reason: your door.
We’re not a franchise and not a general contractor. That single-trade focus is why we diagnose faster and carry the right parts more often than multi-trade shops working Van Nuys. When we quote a price, it’s the price you pay, agreed in writing before any work starts.
Styles & brands we work with






Garage Door Maintenance in Van Nuys
Garage Door Maintenance in Van Nuys is the difference between a door that lasts 8 years and one that lasts 25, and given the Valley’s summer heat, it’s not optional on older doors. A 60-year-old wood sectional with original rollers on a sun-facing wall takes a beating every August. Maintenance here means inspecting the torsion assembly, checking spring cycle life, lubricating rollers and hinges, tightening track bolts that the heat-and-cool cycle works loose, and catching worn cables before they snap. Most Van Nuys maintenance visits run $110 – $220, depending on what we find and what needs replacing.
Lubrication and Hardware Tightening
The dry Valley air dries out grease fast. We re-lubricate all moving parts with a garage-door-specific lubricant, not WD-40, and torque every bolt on the track and hinge assemblies. On older Van Nuys doors, loose hardware is a leading cause of track misalignment and premature roller wear.
Spring and Cable Inspection
Torsion springs have a rated cycle life, typically 10,000 cycles for standard springs. On a door that opens four times a day, that’s about seven years. Van Nuys homeowners who bought their house from an owner who never maintained the door often have springs that are already past that mark. We test spring balance, measure cable wear, and tell you honestly whether your springs have another year or another week.
Garage Door Roller Replacement in Van Nuys
Garage Door Roller Replacement in Van Nuys is one of the most common calls we get from owners of 1950s and 1960s tract homes, because the original steel rollers were never designed for 60-plus years of service. Worn rollers cause the door to run rough, strain the opener, and eventually chew up the track. We replace steel rollers with nylon or sealed-bearing units that run quieter and last far longer than anything installed in 1962. Roller replacement in Van Nuys runs $110 – $220, including the rollers themselves.
Why Old Rollers Fail
Original steel rollers on Van Nuys tract doors have open bearings. Decades of dust, heat, and zero lubrication leave them flat-spotted and seized. When a roller stops rolling and starts sliding, it grinds a flat into the track and creates drag on every cycle. That extra drag is often what pushes an already-weak opener into failure.
What Replacement Involves
We pull the old rollers, inspect the track for damage, and install sealed-bearing rollers that never need greasing. If the track is scored from years of sliding steel, we’ll tell you before we start and quote track replacement as a separate line item, never as a surprise after the fact. The whole job usually takes under an hour.

Trusted Brands We Service in Van Nuys
If your Van Nuys garage has a Wayne Dalton, Craftsman, Raynor, or LiftMaster on it, we know it cold. We’re certified to service eight of the most widely installed residential garage door brands, and we service the brand you already own rather than pushing a replacement. For Van Nuys customers, that means no waiting for a parts order from a warehouse in Riverside; we stock the common repair parts for these brands on our trucks, so a spring replacement or opener repair usually happens in a single visit. From a 1970s Raynor steel sectional to a new LiftMaster with MyQ smart controls, one call covers it.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Repair Problems We See in Van Nuys Homes
- Dried-out torsion springs snapping in the heat. Van Nuys summers routinely pass 100°F, and constant thermal cycling fatigues spring steel faster than almost any other climate condition. We replace springs with high-cycle versions rated for 25,000 to 50,000 cycles, not the 10,000-cycle springs original to most Valley doors.
- Warped and cracked wood panels on sun-facing doors. Original wood sectional doors on Van Nuys’s west-facing and south-facing garages dry out, crack, and warp after six decades of direct sun. By the time we’re called, panels are often beyond repair and partial panel replacement makes better financial sense than endless patching.
- Bent tracks and broken rollers from tight alley access. On Van Nuys’s older tract blocks, garages often open onto rear alleys rather than the street. Cars backing in at an angle clip the door or track, bending rails and flattening rollers. We see more end bearing plate damage and track realignment work in Van Nuys than in any newer Valley subdivision.
- Openers straining against a door that’s out of balance. When a door’s springs lose tension, the opener motor works harder on every cycle. In the Valley heat, that extra load burns out opener gears and circuit boards. Often the opener isn’t actually bad; the springs are. We diagnose the door system first, then the opener, so you don’t pay for an opener you don’t need.
Pricing for Garage Door Repair in Van Nuys, CA
Here’s what garage door work actually costs in Van Nuys, based on the jobs we do most often. These are the prices we quote before starting work, and they don’t change once we get the door open:
| Service | Typical Cost in Van Nuys |
|---|---|
| Spring Repair | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
| Garage Door Repair | $150 – $600 |
What moves the price within these ranges is the age and condition of the hardware. A simple spring swap on a standard 7-foot door sits at the low end. A door with corroded drums, a bent track, and an opener that needs re-setting lands higher. Either way, you get a written quote before we touch a single bolt. Estimates are free, and we’ll never start a job without your approval on the number.
Call (866) 798-2664 for an exact quote on your door.
We Also Serve Cities Near Van Nuys
Our Van Nuys crews regularly work in Van Nuys and the surrounding Valley communities too. If you’re in Valley Glen, Sherman Oaks, Encino, or North Hills, the same team and the same truck parts inventory cover your neighborhood. Call for service anywhere in the central San Fernando Valley.
Serving Van Nuys, CA — Our Local Coverage Area
We’re based in the Van Nuys area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Repair in Van Nuys
We can repair a tilt-up wood door if the springs, cables, and pivot hardware are sound, but most Van Nuys tilt-ups we see are past the point where repair makes sense. The wood is usually cracked or warped from six decades of Valley sun, the pivot arms are worn, and the door has been battered by cars backing in from a rear alley. Retrofit to a modern sectional door with a high-cycle spring runs $700 – $2,200 and brings the opening up to current safety and seal standards. We’ll always quote both options and let you decide. Call (866) 798-2664 for a free assessment.
High-cycle, every time. Van Nuys heat fatigues standard 10,000-cycle springs fast, meaning you’ll be calling us again in five to seven years. High-cycle springs rated for 25,000 to 50,000 cycles cost a little more up front ($180 – $340 installed for most doors) but last three to four times longer, which means you replace them once instead of three times. We quote the high-cycle upgrade on every spring job in Van Nuys because the math is obvious.
Usually the springs. When torsion springs lose tension, the opener motor is doing the work the springs should be doing. That’s why it strains harder on hot days, when the lubricant is thin and components are expanded. We test door balance first. If the door is heavy by hand, we replace the springs and the opener stops laboring. If the door balances fine, we go after the opener itself. That diagnosis-first approach is why we replace fewer openers than generalists do. Call (866) 798-2664 and we’ll test both.
Yes. Van Nuys rear-alley garages are some of the tightest we work on, and we’re set up for it. Our service vehicles carry short-rail openers for low-clearance openings, and our techs are used to working in alley conditions where there’s no room for a full-size truck and trailer. We’ve done spring replacements and track realignments in alley-facing garages off Van Nuys Boulevard, Victory Boulevard, and Roscoe Boulevard. Nothing about a tight alley changes the price; it just changes how we park.
Yes, especially if your door is original to a pre-1980 house and has never been maintained. A door that still opens can have springs near the end of their cycle life, cables that are one heat cycle from snapping, and rollers that are grinding flat. Van Nuys’s heat accelerates every one of those failures. A maintenance visit now costs $110 – $220 and catches a $340 spring and cable failure before it happens. Call (866) 798-2664 to schedule.
Written by Noel Carrington, Owner at Murrieta Garage Door Service, serving Van Nuys and the San Fernando Valley.