Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Murrieta?
Spring replacement in Murrieta typically costs $180 to $340 for a residential garage door, with most single-spring jobs landing in the lower half of that range and two-spring setups at the top. The price depends on the spring type, the door’s weight, and whether the job is a straightforward torsion swap or something more involved. We see the full spread here every week, from basic builder-grade doors in Bear Creek to heavier custom setups up in the hills near La Cresta, and that range holds up.
We’re a garage door specialist, which means when we quote spring work, we’re not guessing. Garages are all we do, and springs are the repair we handle more than any other. If your door came down hard this morning and you need to know what it costs before anyone touches it, read on. Or call (866) 798-2664 for a free estimate and we’ll talk you through it in a few minutes.
Key Takeaways
- Spring replacement in Murrieta runs $180 to $340 for most homes.
- Torsion springs cost more than extension springs, but they last longer and lift smoother.
- A snapped spring is a safety issue, not a maintenance item. Stop using the door until it’s replaced.
- We work on the brand you already have, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Free estimates: call (866) 798-2664.
Spring Replacement Cost Breakdown (2026)
Here’s how spring-related pricing breaks down in Murrieta this year. We keep these numbers consistent across all our pages so you’re never comparing a quote against a figure that moved.
| Service | Typical Price Range |
|---|---|
| Spring Repair / Replacement (single torsion spring) | $180 – $340 |
| Cable Repair (often paired with spring work) | $130 – $250 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Full Garage Door Repair (general) | $150 – $600 |
| New Door Installation | $700 – $2,200 |
What pushes a spring job toward the top of the $180 to $340 range? Usually a second spring. A standard single-car door uses one torsion spring. A two-car door, which describes most of the homes in Murrieta, uses two, and replacing both at once adds parts and labor but saves you a return visit in a year or two. Heavier insulated doors, like a Clopay or Amarr carriage-style door, also carry thicker-gauge springs that cost a little more than the light-duty springs on a builder-grade door. And if we find a frayed cable or a bent track while we’re in there, the total climbs – which is exactly why we walk the whole system before quoting.
What Affects Spring Replacement Pricing in Murrieta
Two spring jobs that sound identical on the phone can quote differently once we look at the door. Here’s what moves the number.
- Spring type. Torsion springs (the horizontal ones mounted above the door) cost more to replace than extension springs (the ones that run along the tracks). Roughly seven in ten Murrieta homes we see use torsion springs, and they’re worth it: quieter, longer-lasting, and safer if one breaks.
- Door weight and material. A steel single-car door is the lightest case. A double-wide insulated door, or a wood-look door with glass, needs sturdier springs and takes longer to balance. That’s a real cost difference, not an upsell.
- Number of springs. One spring versus two. On a two-car door we almost always recommend doing both at once, because springs wear at the same rate and you don’t want to pay for a second callout months later.
- Condition of the cables and drums. A spring that broke from normal fatigue is one thing. A spring that snapped because a cable was binding or a drum was worn is a sign the whole system needs attention. If cable work is needed, factor in the $130 to $250 cable range.
- Local climate and age. Murrieta’s inland heat is hard on springs. We regularly see spring failures in summer months in Temecula-adjacent neighborhoods and newer tracts off Winchester, where garages face west all afternoon and bake. Doors that spend the day in direct sun wear their springs faster.
- Access and door height. A standard seven-foot door is the easy case. An eight-foot door, or a garage with a low-clearance ceiling that makes ladder work awkward, takes more time.
How to Save on Spring Replacement
Springs don’t go on sale, but there are real ways to keep the bill down without cutting corners on something this dangerous.
- Replace both springs at once. If you have a two-car door and one spring broke, doing both in a single visit is cheaper than two separate service calls over the next year.
- Bundle related repairs. If the rollers are shot or a track is out of line, have it done in the same visit while the door is already apart. Rollers run $110 to $220; tracks run $120 to $240. One trip, one labor charge.
- Don’t run the opener on a broken spring. This seems obvious, but we get called for opener repairs that only happened because someone kept cycling a door with a snapped spring and burned out the motor. Fix the spring first.
- Ask for the estimate in writing. A free estimate should tell you the spring cost, the parts, and anything else that needs doing. No surprises at the end.
- Get the door balanced, not just sprung. A properly balanced door puts less strain on the opener and the springs, so they last longer. That’s part of the job, not an add-on.
We offer free estimates, so there’s no reason to guess. Call (866) 798-2664 and we’ll give you a straight number over the phone or set a time to look at it in person.
FAQs – Spring Replacement Cost
Is it cheaper to replace one spring or both?
Replacing both springs at once is usually cheaper overall than replacing one now and the second in a year. A single torsion spring runs $180 to $340, and two-spring replacements sit at the top of that range, but you avoid a second service call and labor charge. Call (866) 798-2664 for an exact quote on your door.
Can you fix a broken spring the same day?
In most cases, yes. Same-day spring replacement is routine for us because we carry the common spring sizes on the truck. The one variable is unusual door weights or an odd spring size we’d need to order, which can add a day. Call (866) 798-2664 and we’ll tell you right away whether we can get to you today.
Why does Murrieta heat cause more spring failures?
Springs are under constant tension, and Murrieta’s inland heat cycles – hot afternoons, cooler nights – wear the steel faster than a coastal climate would. That’s why we see a spike in broken springs across the valley in late spring and summer. Keeping the door balanced and lubricating the moving parts helps, but heat eventually wins. That’s when you call (866) 798-2664.
Do I need cables replaced when I replace springs?
Not always, but often. If the cable is frayed, kinked, or its end has pulled loose, it needs replacing – cable work runs $130 to $250. A cable that fails on its own is dangerous, so we never leave a worn one in place. During the estimate we’ll check the cables and tell you clearly whether they need to go with the spring.
Is it cheaper to repair a spring or replace the whole door?
Repair. A spring replacement at $180 to $340 is far less than a new door installation, which runs $700 to $2,200. You’d only consider a new door if the panels are rusted through, the structure is failing, or you’re remodeling. If your only problem is a broken spring, that’s a repair, full stop. Call (866) 798-2664 for a free estimate and we’ll tell you which situation you’re in.
Why the Brand on Your Door Matters
Springs aren’t universal. A LiftMaster opener paired with a heavy Clopay door uses a different spring spec than a builder-grade Raynor setup from the 1990s. Because garage doors are all we do, we stock and identify the right spring for whatever door you have. And if you’re thinking about linking your opener to an app, or your MyQ system has started acting up, we handle the whole system – from spring replacement in Murrieta to smart-opener setup. Eight brands, one specialist. Back in operation, not just repaired.
What to Check Before You Call
You don’t need to diagnose anything or touch a spring yourself, but a couple of quick observations help us quote faster.
- Does the door feel extremely heavy when you lift it by hand? That points to a spring problem, not an opener problem.
- Is there a visible gap in one of the torsion springs above the door, or a loose coil hanging off an extension spring?
- Did the failure happen first thing in the morning, or after the garage sat in the sun all day?
- What brand is your opener? A quick look at the unit’s label tells us which system we’re working with.
Give us those few details and we can often quote the spring replacement over the phone before we arrive.
Safety First: Don’t Touch the Springs
We’re going to be direct about this. Garage door springs are under enormous tension, and a spring or cable that lets go can cause serious injury. This isn’t a repair to attempt yourself with a set of wrenches from the hardware store. If your spring is broken or the door won’t lift, stop operating the door and call a trained professional. We say this in our garage door repair work around Murrieta all the time, and it’s the most important thing on this page.
How We Quote Spring Replacement in Murrieta
Our pricing is straightforward and our estimates are always free. We look at the door, identify the springs, check the cables, drums, rollers, and tracks, and then give you a real number – not a range that balloons on the spot. If we find something else that needs attention, we show you and quote it separately so you can decide. Since we work on the brand you already have, we’re not going to push a replacement to fit a limited parts inventory. Whatever gets your door running right is what we want to do. And “running right” means back in operation, not a door that works for six months and fails again.
Contact Us for a Free Estimate
If your garage door is stuck, springing, or making noise it didn’t make last month, call (866) 798-2664. A spring replacement in Murrieta runs $180 to $340, and we’ll give you an exact figure up front at no charge. We handle the door, the opener, and everything in between – one call, one specialist, back in operation.
Pricing reflects the Murrieta market as of 2026. Murrieta Garage Door Service offers free estimates – call (866) 798-2664.
What Our Customers Say
"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
— Miguel Morales"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Grace Yang"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Veronica Torres