Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Temple City, CA
Garage door installation in Temple City usually costs between $700 and $2,200 depending on the door style, material, and how much retrofitting your 1950s garage opening needs. We’re Murrieta Garage Door Service, and we’ve served Temple City since 2014. Most of the jobs we handle here aren’t simple swap-outs; they’re careful retrofits where the opening is narrower than modern standard doors, the headroom is tight, and the old tracks were built for a door that hasn’t been made in forty years. Call us at (866) 798-2664 and we’ll measure, explain your options in plain terms, and give you a written price before any work begins.
Why Temple City Homes Are Different
Temple City’s housing stock comes from a very specific era. The post-war boom of the 1940s through the early 1960s transformed the old San Gabriel Valley citrus land into dense tracts of single-story ranch and stucco homes, and those homes came with garages built for a different world. Most are single-car, either attached or detached, with low headroom and openings that measure narrower than today’s standard double-wide doors. When original solid wood or early fiberglass doors finally fail, a standard modern sectional door often won’t fit without modifying the opening, relocating the opener, or converting the spring system.
The climate does its own damage. Dry, hot summers and Santa Ana wind events pull moisture out of wood panels until they crack and warp. Torsion springs stiffen in the heat, and that’s when they snap, usually on a weekday morning when you’re already running late. Winter rains swell wood doors until they bind against the jambs. Along streets like Las Tunas and Live Oak, many garages sit only a few feet from the property line, with alley-facing doors and almost no clearance above the header. That’s where a standard extension spring setup won’t work and we convert to a torsion system instead. It’s a pattern we see over and over in Temple City, and it changes how we approach almost every job.
Styles & brands we work with
Our Main Temple City Services
Two services dominate the calls we get from Temple City homeowners: repairing the doors on these aging mid-century garages, and repairing the openers bolted to ceilings that were never designed for modern motor torque. Here’s what each involves locally.
Garage Door Repair in Temple City
Most repair calls in Temple City start with a snapped spring or a door that’s come off its tracks after years of wood swelling and seasonal movement. Because the garages here run small and tight, we often find the original hardware was sized for a lighter door than what’s currently hanging. We stock torsion springs, cables, rollers, hinges, and brackets on our trucks, sized for the low-clearance setups common in the 91780 ZIP. If the door binds in winter or clatters in summer, the fix usually involves multiple components wearing out together, and that’s what we chase down. Garage Door Repair in Temple City covers the full breakdown.
Garage Door Opener Repair in Temple City
Openers in Temple City run into two common problems. First, older chain-drive units from the 1990s and early 2000s wear out their gears and logic boards, and replacement parts have gotten scarce. Second, openers mounted on low-headroom doors often pull at the wrong angle, which strips trolleys and burns out motors prematurely. We work on LiftMaster, Chamberlain, Genie, Craftsman, and Raynor units, including MyQ smart systems. If the motor hums but the door doesn’t move, or the remote works only from ten feet away, the fix is probably simpler than you think. Garage Door Opener Repair in Temple City explains what we check first.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Temple City
New door installation in Temple City is rarely a straightforward swap. The mid-century single-car openings here are narrower and lower than modern standards, and the original door was often solid wood, which means the framing, springs, and tracks were all built around a heavier, thicker panel than what you’d buy today. When we install a new door, we’re usually retrofitting: resizing the opening if needed, converting extension springs to torsion, and matching the track to the low headroom. Our Garage Door Installation work covers doors from Clopay, Amarr, and Wayne Dalton, and we quote the full job in writing before we order anything.
Garage Door Replacement
Signs you need it
Your door has cracked or warped panels, sags visibly when opening, or the cost of repeated spring and hinge repairs now exceeds what a new door would run.
What it costs in Temple City
A full garage door replacement in Temple City typically runs $700 to $2,200 depending on material, insulation, and how much opening modification your garage needs.
How we do it
We measure your opening and headroom, confirm the spring and track configuration, remove the old door and hardware, install the new panels and tracks, then balance and test the full cycle.
Garage Door Installation Service
Signs you need it
You’re buying a first-time door for a carport conversion, or your current door is too far gone for panel replacement to be cost-effective.
What it costs in Temple City
New garage door installation in Temple City falls between $700 and $2,200 for the complete job, including the door, hardware, and labor.
How we do it
We handle the full scope from start to finish: removing any existing door, prepping the opening, installing panels, tracks, springs, weather seal, and confirming the whole system runs true.
Garage Door Seal Installation
Signs you need it
You can see daylight under the door, leaves and dust blow in from the alley, or water pools at the panel base after rain.
What it costs in Temple City
Garage door seal installation is a smaller job within the $700 to $2,200 new-door range, and as a standalone seal replacement we’ll quote it specifically once we see your floor condition.
How we do it
We check the floor for unevenness, select a bulb or T-style seal that compensates for the slab’s pitch, fasten it along the full width, and test the door’s close for a clean seal.
What Garage Door Installation Costs in Temple City
| Item | Typical range in Temple City |
|---|---|
| New door installation (complete) | $700 – $2,200 |
| Steel or composite upgrade | $900 – $1,800 |
| Low-headroom or torsion conversion add-on | $250 – $500 |
How long does garage door installation take in Temple City?
Most single-car retrofits in Temple City finish in one day, including old door removal and new hardware. If we’re widening an opening or reframing, plan for a second day.
Will a new door fit my narrow Temple City garage?
Usually yes, with the right track and spring setup. We measure the actual opening and headroom rather than assuming, and we’ll tell you honestly if a modification is needed before you spend anything.
If you’re ready to see what a new door would run, call (866) 798-2664. We’ll schedule a free measure and give you a written price on the spot.
Brands We Service in Temple City
We work on whatever brand is already hanging in your Temple City garage. That includes Clopay, Amarr, Wayne Dalton, and Craftsman, plus openers from LiftMaster, Chamberlain, Genie, and Raynor. We stock common spring sizes, rollers, hinges, and seals locally, so most parts are ready the day we show up. Eight brands, one specialist, and no pressure to replace a door that only needs a spring. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Temple City, CA
| Service | Typical range in Temple City |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a Temple City job toward the higher end is the retrofit factor: low headroom, narrow openings, and the need for torsion conversion on setups that were built for extension springs in the 1950s. Whatever the number, we quote it before we start, and the price you’re quoted is the price you pay. No surprise line items after the work is done.
Neighborhoods We Serve in Temple City
We cover all of Temple City’s 91780 ZIP, from the older tract pockets near Las Tunas Drive to the quieter residential blocks around Live Oak Avenue and the areas bordering Rosemead and Arcadia. Most repair calls get same-day or next-morning scheduling, and our trucks are already stocked for the low-clearance garage setups that define this city.
- North Temple City near Live Oak Avenue
- Central Temple City around Las Tunas Drive
- South Temple City toward Rosemead
- East Temple City near the Arcadia line
Service Area – Cities Near Temple City
We schedule jobs in Temple City and the surrounding San Gabriel Valley communities, which are close enough that our technicians move between them easily in a day. If you’re in North El Monte, CA, Rosemead, CA, San Gabriel, CA, or Arcadia, CA, we can usually get to you with the same truck stock and the same specialty focus.
Serving Temple City, CA — Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Temple City
We aim for same-day service in Temple City on spring and cable failures, since a door with a snapped spring won’t open and is a safety issue. Call early at (866) 798-2664 and we’ll give you a straight arrival window.
Most like-for-like door replacements don’t need a permit in Temple City, but if your project changes the opening size or adds a new opener circuit, it may fall under city building review. We’ll tell you what applies to your specific garage and handle what we can on our end.
Yes. Since garage doors are all we do, we carry both door hardware and opener parts on the truck. If your Temple City garage has a failing door and a worn opener, we handle both in one trip instead of sending you to two companies.
Call (866) 798-2664 for a free estimate on any garage door work in Temple City. We’ll explain what’s wrong, what it costs, and what your options are, then you decide.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Temple City Customers Say
"Opener works, remotes are programmed, no complaints on the work. Took three days to get on the schedule though, so if you've got a car trapped inside, say so when you call."
— Doug Rhodes"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
— Malik Prince"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
— Karen Tran